共計 2202 個字符，預計需要花費 6 分鐘才能閱讀完成。

這篇文章將為大家詳細講解有關 SMB Direct 如何加快文件服務器訪問速度，丸趣 TV 小編覺得挺實用的，因此分享給大家做個參考，希望大家閱讀完這篇文章后可以有所收獲。

SMB Direct Requirements：
DMA NICs
Windows feature
QOS policy
Traffic class

RDMA (Remote Direct Memory Access) is based on Direct Memory Access

Remote DMA, or RDMA, is a technology that allows two different computers with RDMA network adapters to write data from the memory of one machine to the memory of another without involving the processor or even the processor cache of either computer.
The data goes from RAM to NIC to NIC to RAM. In the beginning of this course I said that if you wanted to transfer larger files faster you needed to buy a faster NIC, this is a faster NIC.

RDMA 有三個實現版本，iWARP, RDMA over Converged Ethernet (RoCE）和 Infiniband (IB)。由于融合網絡架構的流行，iWARP 和 RoCE 使用場景更加廣泛。
代表 iWARP 的是 Chelsio 的 T520-CR
代表 RoCE 的是 Mellanox 的 ConnectX-3
兩者都支持 RDMA，且都是兩個萬兆接口。

運行 powershell
安裝 Data-Center-Bridging
Install-WindowsFeature Data-Center-Bridging

為 SMB Direct 設置網絡 QoS 策略 (445 is the port number for Microsoft file sharing, or SMB. the priority that I m going to assign it is a 3.)
New-NetQosPolicy SMB -NetDirectPortMatchCondition 445 -PriorityValue8021Action 3

建立新的 NetQosPolicy
Enable-NetQosFlowControl -Priority 3

針對其他流量禁用流控制
Disable-NetQosFlowControl -Priority 0,1,2,4,5,6,7

Now we can apply this policy to the correct adapter(將網絡 QoS 策略應用于目標適配器。)
Enable-NetAdapterQos -InterfaceAlias Slot 2*

If you need to know your interface alias you can use the Get-NetIPInterface to list all of your network interfaces and it will show the interface alias for each one.
Get-NetIPInterface

創建流量類別并為 SMB Direct 指定 30% 的最高帶寬。設置類名稱將為“SMB”。And specify ETS as the Algorithm that will apply that.
New-NetQosTrafficClass SMB -Priority 3 -BandwidthPercentage 30 -Algorithm ETS

If your network adapter supports RDMA then all you need to do is make sure it s enabled on that NIC.
獲取網絡適配器列表來識別目標適配器（以查詢哪些是 RDMA 適配器）
Get-NetIPInterface

And specifically I m looking for the vEthernet with the name of the virtual switch that my VM connects to. And I m going to enable RDMA for the vEthernet, or the virtual network adapter that connects my server to the virtual switch named Adapter 1
Enable-NetAdapterRDMA vethernet (Adapter 1)

Now if you find that after creating and enabling these policies that things stop working the way they should or situations get worse removing these policies uses command very similar to the ones used to create the objects.
Remove-NetQosTrafficClass SMB
Remove-NetQosPolicy SMB

關于“SMB Direct 如何加快文件服務器訪問速度”這篇文章就分享到這里了，希望以上內容可以對大家有一定的幫助，使各位可以學到更多知識，如果覺得文章不錯，請把它分享出去讓更多的人看到。