SOLARIS IPMP如何配置

152次閱讀

共計 2867 個字符，預計需要花費 8 分鐘才能閱讀完成。

這篇文章主要介紹了 SOLARIS IPMP 如何配置，具有一定借鑒價值，感興趣的朋友可以參考下，希望大家閱讀完這篇文章之后大有收獲，下面讓丸趣 TV 小編帶著大家一起了解一下。

IPMP 配置

類型一：IPMP 組內所有網卡均啟用
IP 規劃如下：
e1000g0：數據 IP：192.168.77.1 測試 IP：192.168.77.11
e1000g1：數據 IP：192.168.77.2 測試 IP：192.168.77.22

# ifconfig e1000g0 group test_ipmp
# ifconfig e1000g1 group test_ipmp

# ifconfig e1000g0 addif 192.168.77.11 netmask + broadcast + -failover deprecated up
# ifconfig e1000g0 addif 192.168.77.22 netmask + broadcast + -failover deprecated up

或者（永久生效）
# cat /etc/hostname.e1000g0
192.168.77.1 netmask + broadcast + group test_ipmp up \
addif 192.168.77.11 deprecated -failover netmask + broadcast + up

# cat /etc/hostname.e1000g1
192.168.85.2 netmask + broadcast + group test_ipmp up \
addif 192.168.77.22 deprecated -failover netmask + broadcast + up

類型二：IPMP 組內部分網卡設置為 standby（待機）接口

設置 IPMP 為待機接口時，作為 standby 的網卡只設置測試 IP

IP 規劃如下：
e1000g0：數據 IP：192.168.77.1 測試 IP：192.168.77.11
e1000g1：測試 IP：192.168.77.22

# ifconfig e1000g0 group test_ipmp
# ifconfig e1000g1 group test_ipmp
# ifconfig e1000g0 addif 192.168.77.11 netmask + broadcast + -failover deprecated up
# ifconfig e1000g1 plumb 192.168.77.22 netmask + broadcast + deprecated -failover standby up

或者（永久生效）
# cat /etc/hostname.e1000g0
192.168.77.1 group test_ipmp netmask + broadcast + up \
addif 192.168.77.11 netmask + broadcast + -failover deprecated up

# cat /etc/hostname.e1000g1
192.168.77.22 group test_ipmp netmask + broadcast + deprecated -failover standby up

重啟網卡生效
# ifconfig e1000g0 unplumb
# ifconfig e1000g1 unplumb
# ifconfig e1000g0 plumb
# ifconfig e1000g1 plumb
# svcadm restart physical
# ifconfig -a
e1000g0: flags=1000843 UP,BROADCAST,RUNNING,MULTICAST,IPv4 mtu 1500 index 14
inet 192.168.77.1 netmask ffffff00 broadcast 192.168.77.255
groupname test_ipmp
ether 0:c:29:c8:6d:b4
e1000g0:1: flags=9040843 UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER mtu 1500 index 14
inet 192.168.77.11 netmask ffffff00 broadcast 192.168.77.255
e1000g1: flags=69040843 UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE mtu 1500 index 13
inet 192.168.77.22 netmask ffffff00 broadcast 192.168.77.255
groupname test_ipmp
ether 0:c:29:c8:6d:be

注意：此時 e1000g1 網卡是 STANDBY,INACTIVE 的！

模擬故障：
bash-3.00# if_mpadm -d e1000g0 #停用 e1000g0 網卡
bash-3.00# ifconfig -a
lo0: flags=2001000849 UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=89000842 BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER,OFFLINE mtu 0 index 14
inet 0.0.0.0 netmask 0
groupname test_ipmp
ether 0:c:29:c8:6d:b4
e1000g0:1: flags=89040842 BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,OFFLINE mtu 1500 index 14
inet 192.168.77.11 netmask ffffff00 broadcast 192.168.77.255
e1000g1: flags=29040843 UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY mtu 1500 index 13
inet 192.168.77.22 netmask ffffff00 broadcast 192.168.77.255
groupname test_ipmp
ether 0:c:29:c8:6d:be
e1000g1:1: flags=21000843 UP,BROADCAST,RUNNING,MULTICAST,IPv4,STANDBY mtu 1500 index 13
inet 192.168.77.1 netmask ffffff00 broadcast 192.168.77.255
在 IPMP 切換時，故障網卡會分配一個 0.0.0.0 的偽 IP！